Stand Alone Rainwater Harvesting System
How do uninstall and reinstall the Fasteners?
by RainSaucers Inc. on May 10th, 2013

Each RainSaucerâ„¢ comes with 5 fasteners- 4 for the install, 1 as a backup because we realize that small parts can get lost. We also know that while they are made of industrial strength nylon, they can also be broken if accidentally stepped upon. Having said that, each fastener should provide many years of use even when installed and uninstalled many times. Here's how we recommend  you do this.




Each fastener starts as one single piece with both top and bottom halves pre-aligned so that you just place in the matched up holes, press,  and "snap" into place.




After installed, you can easily remove each fastener by using a flat head screwdriver (or a fingernail) to separate the top and bottom halves.





The two halves look now like this.



To reinstall the two halves, place the bottom half in first to the matched up holes and with one hand, try to maintain some space in the center.





Then with the other hand press and snap in the top half of the fastener and your re-installation is done!


Posted in FAQ    Tagged with no tags

Categories
Awards (3)
Events (10)
FAQ (27)
Jobs (1)
Market (29)
Media (11)
Tools (1)
Video (15)